Alpha

Follow us on

ALPhA Immersions Banner
Teachspin Logo        
           NSF Logo           SPIE Logo      AAPT Logo

TeachSpin, Buffalo, NY

Uses of Johnson and Shot Noise

Dates:   June 20, 2022  to  June 22, 2022

Number of setups available: 1-2

Maximum number of participants: 2-4

------------------------------------------------------------------------------------------------------------------------------------------

This Immersion will enable participants to investigate electronic noise. We may touch lightly on electro-static and magneto-static interference, but the focus will be on the fundamental sources of noise: the thermal or Johnson noise in resistors (vn2 = 4RkBTΔf) and the shot noise that is present in some currents (in2 = 2eiDCΔf). These investigations have two main motivations. First, many experiments in physics involve electrical signals, and where we are interested in making the signal to noise ratio as large as possible, these fundamental noise sources set a limit on such capabilities. An understanding of these fundamental sources can guide us when designing an experiment, and allows us to know when the limit has been reached. Second, an accurate measure of noise can lead to a determination of some physical constants. Johnson noise can be used to determine Boltzmann’s constant (kB) or the absolute temperature (T). And shot noise can be used to measure the charge on the electron (e).


The immersion will use the Noise Fundamentals apparatus developed by Teachspin. Additional equipment—a digital oscilloscope, a good voltmeter, and a signal generator—will all be provided. Participants need only bring a calculator, pencil and notebook. We will start by discussing the signal chain, and do some straightforward electronic measurements of gain and bandwidth (Δf). Then we will measure the Johnson noise as a function of bandwidth. This motivates the “units of noise”, V2/Hz and V/√Hz. Then we will look at the dependence of Johnson noise on resistance (R) and (time permitting) the temperature.

On the second day we’ll reconfigure the pre-amp electronics to be a trans-impedance amplifier (much less scary than it sounds), learn a bit on how to capacitively compensate the gain, and then investigate shot noise from a light bulb shining on a photodiode to make a measurement of the electron charge. Time permitting; we might also look at currents that do not display full shot noise.



Host and Mentor:

David Van Baak is Professor Emeritus of Physics from Calvin College. His academic career included teaching and developing in the advanced-lab at Calvin College from 1980 through 2014; and since 2005 it has included collaborations with TeachSpin. Since 2014 he has been full time at Teachspin.

Do you remember the first experiment in which “noise” competed with your signal?   Was it actually ‘drift’, ‘pick-up’, or ‘interference’?  If not, did you also learn about more fundamental sources of noise, not subject to the usual cures and fixes?  Or, have you encountered those weird units, V/ÖHz, before?  Do you know how to make sense of them, to explain them to students, or to measure them?  This Immersion in noise will give you experience in all these topics, and will even introduce you to experiments in which ‘the noise is the signal’.

Dr. David A. Van Baak, Teachspin, Inc., 2495 Main Street, Suite 409, Buffalo NY 14214-2153. Email: dvanbaak@teachspin.com. Telephone: 716-885-4701.

.

Please note that the Jonathan F. Reichert Foundation has established a grant program to help purchase apparatus used in Laboratory Immersions. Limitations and exclusions apply, but generally speaking the Foundation may support up to 40% of the cost of the required equipment.

Copyright © 2007-2024 by the Advanced Laboratory Physics Association.

Website Maintenance by Webstix

Powered by Wild Apricot Membership Software